2 playback of vitc signals, Using the audio dubbing function, Camera information – Panasonic NV-S99A User Manual

Page 54: 2 press the [play] button in the vtr mode, 3 press the [pause] button, 4 press the [a.dub] button, 5 operate the audio source unit, 6 press the [pause] button again, 7 press the [stop] button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2 Playback of VITC Signals

Using the Audio Dubbing

Function

•When a tape without recorded VITC signal is

played back, or when the VITC signal drops out
during the playback, the VITC Counter in the
Viewfinder will show

■ Playing Back a Recording Made with

“DR-ON” selected for “VITC”.

Checking the VITC number and the camera
information is possible by repeatedly pressing the
[COUNTER] Button during playback in the VTR
mode.

'

---------------------- 1

0:00.00

M 0:00.00

DHOOMOOSOaF

______ .

1

OHOOMOOSOOF

15И

MF

1/1000

F2.0

■ Camera Information

The camera information (zoom magnification,

manual focus, shutter speed, iris setting, etc.) is
automatically recorded together with the VITC
signals. This information can be checked in the

Viewfinder during playback. The date and time are
also automatically recorded as part of the camera

information. They can be checked in the
Viewfinder during playback by pressing the
[DATE/TIME] Button, (p. 14)

■ Playing Back a Recording Made with

“DR-OFF” selected for “VITC”.

•When selecting “DR-OFF” for “VITC”, the

date/time and camera information cannot be
displayed during playback. Even if the [DATE/
TIME] Button is pressed, only bars will be

displayed as shown below.

Audio Dubbing can be performed by using the
stereo microphone or an external microphone.

1

Insert the recorded cassette with the

erasure prevention tab intact.

2

Press the [PLAY] Button in the VTR mode.

Play back the tape to locate the point where

you want to start the Audio Dubbing.

3

Press the [PAUSE] Button.

4

Press the [A.DUB] Button.

The “ADUB1Г Indication appears in the

Viewfinder.

5

Operate the audio source unit.

6

Press the [PAUSE] Button again.

The Audio Dubbing starts.
The “ADUB >” Indication appears in the

Viewfinder.

7

Press the [STOP] Button.

The Audio Dubbing stops,

■ When Playing Back a Cassette Tape on

which Audio Dubbing Has Been

Performed...

Use the Audio Selector Switch to select the sound

to be played back,

Hi-Fi:

The original sound (sound before

performing audio dubbing) alone can
be heard.

MIX:

The original and the dubbed sound
can be heard mixed together.

NORMAL; The dubbed sound alone can be

heard.

a

О

55

Advertising