Using the car battery cord (optional), Notes – Panasonic NV-S99A User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Car Battery Cord (Optional)
Notes:
1. The Car Battery Cord can only be used with
12 V DC negative-grounded vehicles.
2. Do not start the car engine while the Movie
Camera is being powered by the car battery.
3. If the voltage drops suddenly e.g. because the
car air-conditioner is turned on, the Movie
Camera is automatically turned off to protect it.
Wait about 10 seconds before turning it on
again.
4. Some cars, RVs and campervans use 24 V.
Please confirm with vendor that your vehicle
uses 12 V before using the Car Battery Cord, if
used on 24 V, damage may occur and is not
covered by the warranty.
1
Start the engine and then plug the Car
Battery Cord into the Cigarette Lighter
Socket.
2
Connect the other end of the cord to the
[DC IN] Socket on the Movie Camera.
O)
W
%
c
о
в.
о
51