Using the remote controller, Controls and functions, How to insert the button-type battery – Panasonic NV-S99A User Manual
Page 6: Replacing the button-type battery, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Remote Controller
Stopper
■ Controls and Functions
1 [W*T] Zoom Buttons (p. 17)
2 [REW] Button (p. 25,47)
Use this Button for:
• Recording Review
• Review
• REW (Rewind)
•Camera Search
3 [PAUSE] Button (p. 25)
4 Recording Start/Stop Button (p. 17)
5 [FF] Button (p. 25, 47)
Use this Button for:
•Cue
•FF (Fast-Forwarding)
•Camera Search
6 [PLAY] Button (p. 25)
7 [STOP] Button (p. 25)
■ How to Insert the Button-Type Battery
1
Pull out the Battery Holder white pushing
the stopper.
2
Turn the Battery Holder upside down and
Insert the Battery with the (+) mark facing
downward until it locks with a click.
3
Insert the Battery Holder into the Remote
Controller.
■ Replacing the Button-Type Battery
The life of the battery is about one year.
Replace the exhausted battery with a new CR2025
Battery.
Information for your safety
WARNING
‘THE LITHIUM BATTERY” IS A CRITICAL
COMPONENT (TYPE NUMBER CR2025
MANUFACTURED BY PANASONIC).
IT MUST NEVER BE SUBJECTED TO
EXCESSIVE HEAT OR DISCHARGE. IT
MUST THEREFORE ONLY BE FITTED IN
EQUIPMENT DESIGNED SPECIFICALLY
FOR ITS USE
REPLACEMENT BATTERIES MUST BE OF
THE SAME TYPE AND MANUFACTURER.
THEY MUST BE FITTED IN THE SAME
MANNER AND LOCATION AS THE
ORIGINAL BATTERY, WITH THE
CORRECT POLARITY CONNECTIONS
OBSERVED.
DO NOT ATTEMPT TO RE-CHARGE THE
OLD BATTERY OR RE-USE IT FOR ANY
OTHER PURPOSE IT SHOULD BE
DISPOSED OF IN WASTE PRODUCTS
DESTINED FOR BURIAL RATHER THAN
INCINERATION".