Clarion Platinum Sound Processor - Manual (Page 6)

Platinum Sound Processor 1
I. Platinum Sound Processor
Your audiologist will explain and demonstrate the adjustable
patient controls and features of the Platinum Series Processor.
The program switch, on the left side of the control panel, is used to
turn the Processor on and off, to select one of three programs, and
to test the headpiece microphone. The dots on the control panel
represent different sound processing strategies or variations of a
single sound processing strategy that may be programmed into the
Processor by the clinician.
! represents program No. 1, !!
represents program No. 2, and represents program No. 3. Your
audiologist will determine how many programs are appropriate. The
! position represents the headpiece microphone tester function.
Volume Control
The volume control ( ) located to the right of the program
switch, allows the user to adjust the loudness level of the Processor.
Turning the control to the left (toward the smaller end of the scale)
decreases the volume.
Program Switch
Headpiece Jack
Volume Sensitivity
LED Indicator
!!
!