Yamaha RX-V1065 - Manual (Page 11)

Quick start guide
When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.
Step 1: Prepare items for setup
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7.1-channel sound system.
Front right speaker
Requirements qty.
Speakers Front speaker 2
Center speaker 1
Surround speaker 2
Surround back
speaker 2
Active subwoofer 1
Speaker cabie 7
Subwoofer cabie 1
Reproduction component such as DVD piayer 1
Video monitor such as TV 1
Video cabie or HDMI cable 2
Audio cable 2
• Prepare two magnelically shielded speakers (Гог front). The priority of
the requirement of other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back spcaker(s)
• If your video monitor is a CRT. we recommend that you use magnetically
shielded speakers.
• Video and audio cables are unnecessary if you use HDMI cables.
Step 2: Set up your speakers
Place your speakers in the room and connect them to this
unit.
Placing speakers
Connecting speakers c^ p. lO
R 11
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (ti>'P. 19).
Step 3: Connect your components
Connect your TV, DVD player, or other components.
Connecting a TV monitor or projector
Connecting other components
Connecting a multi-format player or an
external decoder
Connecting an external amplifier
Connecting a USB storage device
Connecting a Yamaha iPod universal dock or
Bluetooth wireless audio receiver
Connecting the FM and AM antennas
Connecting an XM Mini-Tuner Home Dock
Connecting a SiriusConnect tuner РЭгР14
c^p 15
C^P 16
C^P 16
C^P 17
C^P 17
C^P 18
[iSrP,7.7
C^P 77
Step 4: Turn on the power
Connect the power cable and turn on this unit.
Connecting the power cable
Turning this unit on and off i & p 1 8
i & p 1 8
Step 5: Select the input source and start
playback
Select the component connected in step .7 as an input
source and start playback.
Basic procedure
Selecting sound field programs 1&-P. 22
I&-P. 25
This unit supports the SCENE function (page 22) that changes the input
source and sound field program at one time. Eour scenes are preset for
different purposes for Blu-ray disc. DVD and CD. and you can select
from a scene from those just by pressing a remote control key.
8 En