Yamaha RX-V1065 - Manual (Page 32)

FM/AM tuning
The FM/AM tuner of this unit provides the following two
modes for tuning.
■ Frequency tuning mode
You can tune in to a desired FM/AM station by searching
or specifying its frequency.
■ Preset tuning mode
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
■ Adjust the FM/AM antennas connected to this iiiiil for the best reception.
1
Rotate the ©INPUT selector (or press
BITUNER) to select “TUNER” as the input
source.
You can switch between stereo and monaural for FM broadcast in the
Option menu (page 48).
(U.S.A. model only)
When tuning in to an HD Radio station, the HD indicator lights up. See
page 31 for details about the HD Radio features.
I To tune in by direct frequency tuning, press
OUNumeric keys to enter the frequency of
the station.
Enter only integers. For example, if you want to set
the frequency to 88.9 MHz, enter “889”.
Notes
* When you press OlNumeric keys during preset tuning, a
preset number is selected. .Set tuning mode to frequency tuning
mode using (H)TUNING/CH <1 / > (or HTUN./CH A / V)
prior to the operation.
• "Wrong Station!" appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that the
entered frequency is correct.
Press ©FM (EIFM) or ©AM (HAM) to select You can register up to 40 FM/AM stations (Preset),
a band.
“FM” or “AM” appears on the front panel display
according to the band that you have selected.
Registering stations by automatic station
preset
Press ©TUNING/CH <1 /[> (or HTUN./CH
A / V) to specify the frequency.
To adjust the frequency to a higher range, press 1> (or
A). To adjust it to the lower range, press <1 (or V)-
The TUNED indicator on the front panel display
lights up when the tuner is tuned in to a station. The
STEREO indicator also lights up if the program being
broadcasted is in stereo.
The frequency changes in the following manner according
to how you press
©TUNING/CH <1 /1> (or HTUN./
C H A / V ) .
When you press the key more than 1 second
The tuner searches the frequency of a station that is
detectable around the current frequency. This is effective
when the tuner can receive strong signals without any
interference. Once the search starts, release the key.
When you keep holding the key, the search continues even
when a station is detected. This is useful when you want to
tune in to a specific station.
When you press and release the key
The tuner increases or decreases the frequency in steps.
Use this method when the tuner cannot receive strong
signals and stations are skipped during the search.
The tuner automatically detects FM stations with strong
signals and registers up to 40 stations. To register AM
stations, use manual station preset.
(U.S.A. model only)
You can register up to 40 FM HD Radio, AM HD Radio
and analog FM radio stations with strong signals.
Note
* (U.S.A. model only)
If you rcgislcr an FM HD Radio slalioii with this feature, only the main
audio program of the station (HDl) will be stored. To store other audio
program, preset the station manually.
1
Rotate the ©INPUT selector (or press
BITUNER) to select “TUNER” as the input
source.
2
Press 01OPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 47).
3
Select “Auto Preset” and then press
QIENTER.
U I - ' T I G M
#Putu Preset
Automatic station preset starts about 5 seconds later
from the lowest frequency upwards.
29 £n