Setting the code number and the locking channels, Note, Notes – Yamaha RX-V1065 User Manual

Page 43: Tuning into the locked channels, Mcursor a / v

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SIRIUS Satellite Radio™ tuning (U.S.A. model only)

You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search a channel by pressing

(B)TUNING/CH

<l/l> (or

HTUN./CH

A

/

V).

Setting the code number and the locking

channels

Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked.

1

Press

01OPTION

on the remote control.

The Option menu for “SIRIUS” is displayed.

2

Press

HCursor

A / V

repeatedly to select

“Parental Lock” and then press

HENTER.

3

Use

HCursor

<l / o (to select a digit to edit)

and

HCursor

A / V

(to select a number) to

enter the desired 4-digit code number.

If you have entered a code number before, enter the
same code number.

The entered code number is needed for tuning in the
channel or unlocking the channel. Write it down below.
Code number:

4

Press QIENTER.

The confirmation screen appears.

5

Press HENTER again to confirm the code

number.

“OK” and then the SIRIUS Satellite Radio channel
list appears.

Note

If a code numher is already registered and you enter the different

number. “Wrong" appears and the screen returns to step 3. Enter
the correct code number.

• If you forget the Parental lock code or want to change it. reset it

using “SR PIN" (page 64).

Press HCursor <l / o to select the category

of a channel you want to lock.

7

Press

mCursor A / V

to select a channel you

want to lock.

Notes

*

ou can also select a channel by using [UCATEGORY / D> or

[1TUN./CH

Д/V-

'

• While the SIRIUS Satellite Radio channel list screen is displayed,

sound of the selected channel is output even the channel is locked.

8

Press HENTER to lock the selected

channel.

A check mark appears next to the locked channel on
the GUI screen. You can toggle channel lock and
unlock as you press HENTER.

9

Repeat steps 6 through 8 to lock all the

desired channels.

10 Press HRETURN repeatedly to exit the

“Parental Lock” screen.

This unit is tuned into the last channel you select in
the “Parental Lock” screen. If the channel is locked,
this unit is tuned into “184 Weather/Emergency” or
“000 Sirius ID”.

Tuning into the locked channels

Tune into the channel with direct number access (page .88)
or Preset Search mode (page .89). When you tune into the
locked channel, “LOCKED” appears on the front panel
display and GUI screen, followed by the following
message. Enter the set Parental lock code by using the

OUNumeric keys. To cancel this operation, press
HENT.

Note

*

If an incorrccl number is entered. “Wrong" appears on the front panel

display or the GUI screen and this unit is limed into the previously
selected channel.

40

En

Advertising