Yamaha RX-V1065 - Manual (Page 45)

Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to
the DOCK terminal on the rear panel of this unit (page 17), you can enjoy playback of your iPod using the supplied
remote control or the menu displayed on the GUI screen. You can also use the Compressed Music Enhancer mode of this
unit to improve the sound quality of the compression artifacts (such as MP3 format) stored on your iPod (page 27).
Notes
• iPod louch. iPod (Click and Wheel including iPod classic). iPod nano, and iPod mini arc supporlcd.
• Some fcalurcs may not be compatible depending on the model or the software version of your iPod.
• Some fcalurcs may not be available depending on the model of Yamaha iPod universal dock. The following sections describe the procedure when using
the YDS-11.
CEl)''.
• Once ihc connection between your iPod and this unit is complete. “iPod connected“ appears on the front panel display.
• For a complete list of status messages lhal appear on the front panel display and GUI screen, see the “iPod" section on page 73.
• (U.S.A. model only)
Once the connection between an iPod that supports iTuncs Tagging fcalurc and this unit is complete, this unil transmits iTuncs Tagging iiiformalion to the
iPod (page 31).
You can control your iPod when you set it in the iPod
universal dock and switch the input source to DOCK. The
operations of your iPod can be done with the aid of the
video display (menu browse mode) or without it (simple
remote mode).
When you connect your iPod to this unit, you can perform
the following operations with the remote control.
Key Function
ENTER Subsequent menu
A Menu up
H V Menu down
<l Previous menu
> Subsequent menu
<K1 Search backward (Press and hold)
» Search forward (Press and hold)
l>I>l Skip forward
KM Skip backward
lif
□ Stop
DD
Pause (Menu browse mode)
Play/Pause (Simple remote mode)
I>
Play (Menu browse mode)
Play/Pause (Simple remote mode)
H DISPLAY
Switch between Menu browse mode and
Simple remote mode
Controlling iPod in menu browse mode
You can browse song or video files stored on your iPod
using the GUI screen. You cannot directly control your
iPod in this mode.
• “_“(undcrscorc) is displayed for characters that this uiiil cannot display.
1
Rotate the ©INPUT selector (or press
BIDOCK) to select “iPod” (DOCK) as the
input source.
2
Press UDISPLAY on the remote control.
The following screen appears on the GUI screen.
3
Press HCursor A / V to select “Music” or
“Videos” and then press HCursor o.
• Select “Music” to browse music files.
• Select “Videos” to browse video files.
Note
• The “Videos" menu does not appear unless the both your iPod and
Yamaha iPod universal dock support the video browsing feature.
Controlling iPod in simple remote mode
You can perform basic iPod operations (play, stop, skip,
etc.) using the supplied remote control without displaying
the menu on the GUI screen. You can also directly control
your iPod in this mode.
42 £n