Yamaha RX-V1065 - Manual (Page 57)

Operating various settings for this unit (Setup menu)
You can call the Setup menu using the remote control and change the settings of various menus.
For details, read “Basic operation of the Setup menu” first, and see the respective pages.
Menu/Submenu Function Page
Speaker Setup Sets items for speakers. 55
Auto Setup (YPAO) Automatically adjusts output characteristics of speakers. 55
Manual Setup Manually adjusts output characteristics of speakers. 55
Speaker Configuration Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
55
Speaker Level Separately adjusts volume of each speaker. 57
Speaker Distance Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
57
Equalizer Selects an equalizer that adjusts speaker output characteristics. 57
Test Tone Generates test tones. 57
Sound Setup Sets various items for sound outputs. 57
Dynamic Range Adjusts dynamic ranges of speakers and headphones. 57
Lipsync Adjusts delay in output timing between video signals and audio signals. 58
HDMI Auto Lipsync Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
58
Auto Delay Fine adjusts a delay time of HDMI Auto. 58
Manual Delay Manually fine adjusts the delay of audio and visual output. 58
Function Setup Sets various items for HDMI and display. 58
HDMI Sets various items for input sources. 58
HDMI Control Selects on or off of the HDMI control function when a component that supports
the HDMI control function is connected with this unit.
58
Standby Through Selects on or off of output of HDMI signals input from the HDMI 1-4 Jacks to the
HDMI OUT jack when this unit is on standby.
58
Audio Output Selects this unit or a component connected to the HDMI OUT jack of this unit for
reproducing sound signals.
58
Resolution Sets resolution of the HDMI output that is converted from analogy visual input
signals.
58
Aspect Set an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
59
Display Sets items for a video monitor or the front panel display. 59
Dimmer Sets brightness of the front panel display. 59
Front Panel Display Scroll Selects the way to display characters on the front panel display. 59
GUI Position Adjusts top and bottom positions of the GUI screen displayed on the video
monitor.
59
Volume Sets items for volumes. 59
Adaptive DRC Adjusts the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
59
Max Volume Sets the maximum volume level so that the volume will not be accidentally
increased.
59
Initial Volume Sets the volume at the time this unit is turned on. 59
Input Rename Changes input source names to be displayed on the GUI screen or the front panel
display.
60
Zone2 Sets the maximum volume level and initial volume level of Zone2. 60
Zone2 Max Volume Sets the maximum volume level so that the volume will not be accidentally
increased.
60
Zone2 Initial Volume Sets the volume at the time this unit is turned on. 60
54 En