Enter the desired remote control id code – Yamaha RX-V1065 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Advanced setup
Enter the desired remote control ID code.
To switch to IDl:
Press
OUNumeric keys
to enter “5019”.
To switch to ID2:
Press
OUNumeric keys
to enter “5020”.
Once the remote control code is registered,
Q3TRANSMIT
blinks twice.
If it fails,
QITRANSMIT
blinks six times. Repeat
from step 1.
It you inilializc the settings of this tinit. "REMOTE ID" (remote eontrol
eode of this unit) is set to "IDl".
65 En
Advertising