To select the desired tape speed, To interrupt recording, To record one tv programme while – Panasonic NV-HD70EA User Manual
Page 19: Viewing another programme, To display the approximate remaining, Tape time, On-the-spot recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the-spot Recording
To select the Desired Tape Speed
1 Press RECORDING SP/LP to display the tape speed
indicator.
2 Keep
RECORDING SP/LP pressed for more than
2 seconds while the tape speed indicator is displayed, to
change the tape speed.
.RECORDING
To interrupt Recording
Press
PAUSE/STILL during recording.
Press again to continue recording.
PAUSE/STILL
0
To record One TV Programme while
Viewing Another Programme
1 Refer to the on-the-spot recording operations steps 1
to 4.
2 Press
VTR/TV to select the TV mode.
3 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Press TAPE SELECT to select the corresponding
cassette tape length.
TAPE SELECT
E195'. For E30, -60, -80, -120, -180 and -195 tapes
E240; For E240 tape
E260: For E260 tape
2 Press DISPLAY.
DISPLAY
O
Notes:
•When a video cassette with a broken off tab is inserted,
the “EST indication will flash to indicate that recording is
not possible.
• The recording pause mode will be automatically released
after 5 minutes, and be back to the stop mode.
CO
C
o
CT3
CD
a
o
.o
CD
OQ
Clock —Counter -Remaining Tape Time-