Editing, Preparation, Operations – Panasonic NV-HD70EA User Manual
Page 25: Press pause/still, Assembly editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing
Other Functions
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
This enabies you to record a new segment immediately
after a previously recorded segment.
Preparation
•Connect a movie camera or another VTR to this VTR as
shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
• Select the video source required by pressing
INPUT
SELECT to set A1.
1
2.4
Operations
1
Search for the end of the previous
recording.
Press
PAUSE/STILL.
PAUSE/STILL
0
Q Press
REC to switch the VTR from the
pause mode to the recording standby
mode.
A
Start the new recording by pressing
^ PAUSE/STILL again.
PAUSE/STILL
0
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.