Panasonic NV-HD70EA - Manual (Page 29)

Infra-red Remote Controller
4
1 6 Display
17 Infra-red Transmitter
The programming data are transmitted from here to the
VTR.
18 ^v(Y)
•To programme a timer recording.
•To set the clock.
•T
0
preset the TV stations.
19 DATE(M)
•To programme a timer recording.
•To set the clock.
20 TIMER REC
To turn the timer recording function on and off.
3 is lit or not lit.
Once operating timer recording function, the normal
VTR operation is not possible unless this button is set
to off.
21 G-CODE
For the G-Code programming.
22 CHECK
To check timer programmes while the Timer recording
function is on.
23 RECORDING SP/LP
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
24 CONFIRM
To convert the data of a G-Code number.
25 INPUT SELECT
To select the “At ” external recording source.
26 AUDIO OUT
To select the desired sound mode.
At the every push of this button, the audio output mode
changes as follows.
c
Stereo—Left—‘Right—^-Normal audio track □
The Left (L) and Right (R) indicators show which sound
mode is selected in the following way.
Stereo: Both the Left (L) and Right (R) Indicators are
lit.
Left: The Left (L) Indicator is lit.
Right: The Right (R) Indicator is lit.
Normal: Both the Left (L) and Right (R) Indicators are
not lit.
27 CLOCK/PRESET
•To set the clock.
•To set the TV stations.
•To set the manufacturer number of the TV,
28 RESET
To reset the tape counter (elapsed time) to “0:00.00”,
• The tape counter is automatically reset to “0-:00.00''
when a video cassette is inserted.
29 No function.
30 TAPE SELECT
To set the cassette tape length in order to obtain
correct indication of the remaining tape time.
El95: For E30, -60, -80, -120, -180 and -195 tapes
E240: For E240 tape
E260: For E260 tape
31 TRACKING/V-LOCK
For manual tracking adjustment
The + and - buttons are used to adjust the tracking
when, for example, noise bars on the picture are better
removed manually than by the automatic digital
tracking control. After making a manual adjustment,
press both buttons together to return to automatic
digital tracking control.
For slow tracking adjustment
When noise bars appear during Still or Slow playback,
switch over to slow playback and adjust with the - or
- Button to reduce the noise bars.
For vertical locking adjustment
Use the -t- and - buttons to minimize any vertical jitter
during still-picture playback.
32 Programme Position Selector Buttons
•To select the programme positions (1-42).
CO
9:
(2D-CO-CO
C
,o
A
O
CO
o
Q
•To programme a G-Code number.
33 VTR/TV
To select the VTR mode or TV mode.
34 TRANSMIT
To transmit the data that has been set on the remote
controller to the VTR.
35 CANCEL
To cancel the settings made for a timer recording.
36 OFF(H/M)
• To programme a timer recording.
•To set the dock.
•To preset the TV stations.
•To set the manufacturer number of the TV.
37 ON(D)
•To programme a timer recording.
•To set the clock.