G-code programming system, Ai crystal view control, Dear customer – Panasonic NV-HD70EA User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dear Customer
May we take this opportunity to thank you for purchasing this
Panasonic Video Cassette Recorder,
We would particularly advise that you carefully study the
Operating Instructions before attempting to operate the unit and
that you note the listed precautions.
G-Code Programming System
Programming is now easier than ever; simply enter the
G-Code number provided in the programme schedule
column carried by newspapers and magazines,
• G-Code is a trademark applied for by Gemstar
Development Corp, G-Code system is manufactured
under licence from Gemstar Development Corporation,
AI Crystal View Control
Al circuit for automatic tape calibration (computer-
controlled calibration) and optimizing of playback
characteristics.
During playback the contrast of tapes recorded with good
level is automatically optimized; when a tape recorded with
insufficient level is played back, the noise reduction circuit is
activated automatically.