Tuning the tv to your vtr – Panasonic NV-HD70EA User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning the TV to your VTR
Connections
Tuning the TV to your VTR
è
O)
c
The VTR supplies a signal to the TV set via the RF coaxial
cable on channel 2 or 3.
It IS possible to view the video picture on your TV in the
same way that you watch TV broadcasts.
If you have connected the VTR to the TV through the
video and audio input sockets then you do not need to
follow the procedure mentioned below. Instead, simply
select AV mode on the television.
Operations
1
POWERO/I
Display Symbols
Turn on the TV and VTR.
vTRm/
o
Select the VTR mode.
H
Select the video playback channel which is
not occupied with any TV station.
H: Channel 3
L: Channel 2
PLAY
Insert a recorded cassette tape and press
PLAY.
Select a programme number on the TV set
which you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the cassette tape currently playing.
STOP
Stop the playback.