Panasonic NV-HD70EA - Manual (Page 27)

Controls and Connection Sockets
0 POWER SAVE
OFF: For normal VTR operation
Characters appear on the display even when
the VTR's power is off.
ON: For operating the VTR in the power-saving
mode
No characters appear on the display when the
VTR’s power is off.
0 NICAM/MONO
NiCAM: Normally set at this position.
MONO: Only set at this position to record the normal
sound during a NICAM broadcast or if the
stereo sound is distorted due to inferior
reception conditions.
0 V A/- +
To select the required programme position (TV
station).
To set the clock and timer recorcing.
0 CLOCK SET
To set the time.
0 SP/LP/NEXT
To select the tape speed required for recording.
SP gives the best picture quality.
LP gives the longest recording time.
To proceed to the next item during setting procedure.
0 TUNER PRESET
To initiate TV station settings for the tuner,
0 SLEEP/SHIFT
To set the time to turn off the VTR automatically.
To blank unoccupied programme position.
© PROG/CHECK
To select a timer programme number.
"P1, P2, P3..,orP8” is lit.
To display details of preset timer recording whiie the
timer recording function is on.
© TIMER REC
To turn the timer recording function on and off.
0 is lit or not lit.
Once operating timer recording function, the normal
VTR operation is not possible unless this button is set
to off.
© REC
To start a recording.
© RFOUT
To connect to the aerial terminal on a TV set.
Video Playback Channel Selector
To seiect the video playback channel.
© VIDEO OUT
To connect the video cable to a TV or another video
recorder.
© AUDIO OUT
To connect the audio cable to a TV or another video
recorder.
© RFIN
To connect to the external aerial.
© VIDEO IN
To connect the video cable to a movie camera or
another video recorder.
© AUDIO IN
To connect the audio cable to a movie camera or
another video recorder.
© AC IN­
TO connect to the main power supply.
C
O
O
CO
03
Q