Setting the ans/fax mode ring count – Panasonic KX-F1110NZ User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the ANS/FAX mode ring count
This feature determines the number of rings after which the unit answers a call in the ANS/FAX mode.
You can choose from 2 to 9, TOLL SAVER and RINGER OFF.
TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any
new voice messages. If the unit answers on the second ring, there is at least one new
recorded message. If the unit answers on the fourth ring, there are no new recorded
messages. To save the toll charges for the call, hang up immediately when you hear the third
ring. The third ring indicates that there are no new messages.
RINGER OFF: The unit will answer without ringing.
Helpful hints:
•To answer a call before the unit does, Increase the number of rings. If you answer from an extension phone
on the same line, see page 44.
• If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1
2
4
5
Press [MENU].
Display:
Press then 0
SYSTEM SET UP
ANS/FAX RING
Press ISTART/COPY/SET].
RING=2
[ ▼ A ]
Press (3 or (3 to select the desired number.
Press (START/COPY/SET).
Press [MENU].
Dial keypad [
men
U]
u
(START/COPY/SET) (3
59