Panasonic KX-F1110NZ - Manual (Page 80)

Printing/faxing from a Windows application
(cont)
Faxing from a Windows appiication_______________________
You can access the fax function from a Windows application by using the Print command in the File menu.
Select Panasonic MFC Fax as your printer.
To send a document created from Microsoft Word, proceed as follows;
For Windows 95 Users:
1 Open the document you wish to send.
Select Print from the Fiie menu.
•The Print dialog box will appear.
Select Panasonic MFC Fax from the Name field in
the Printer group and select Properties. <Fig. 1 >
•The Panasonic MFC Fax dialog box will appear.
<Fig. 2>
Set the Page Size, Resoiution and Orientation.
Then click the OK button.
Click the OK button on the Print dialog box.
•The Fax Send dialog box will appear. <Fig. 3>
Enter the name and fax number using the
keyboard or select the desired entry in the address
book currently displayed in the Address Book
name box.
Select the Start button in the Fax Send dialog box.
Note:
•If the line is busy or there is no answer, the Message
Center Outbox application will automatically redial the
number up to 2 times.
•To cancel transmission after diaiing:
Press [STOP ] on the facsimile unit.
OR
Select the Outbox window in the Message Center
window. Then select the CANCEL button on the
toolbar.
■ '■
4 jJOJinail
<Fig. 1>
PuriEinnrm: MH; I ax <jn (;OM?
Page Size;
Besolution;
Orientation —
OLandscape
M (210 X 297 mm)
Standard(200x100)
<Flg. 2>
fMulli hundjonCe^r .
‘ 'f ...........................
cFig. 3>