Panasonic KX-F1110NZ User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Signaling your pager that you have received a fax
document
This feature allows your unit to call your pager when your unit receives a fax message.
1
2
3
4
5
6
Press (MENU].
Display:
Press [^, then 0
SYSTEM SET UP
7
8
FAX PAGER
Press (START/COPY/SET).
MODE-OFF
[ ▼ A ]
Press (3 or (3 to select “ON”.
MODE=ON
[▼A
•If this feature is not required, select “OFF”.
Press START/COPY/SET .
NO. =
Enter your pager number.
• If this feature does not work properly, press
[ REDIAL/PAUSE) more than once at the end of
your pager number to extend the paging time.
If you wish to display a message on your pager,
enter the message after your pager number and
[REDIAL/PAUSE].
Programming methods may vary depending on
the pager company. Contact your pager company
for details.
•You can enter a total of 46 digits and/or pauses.
Press [START/COPY/SETI.
Press MENU .
Note:
•This feature is not available when the receive mode is
set to the TEL mode.
71