Panasonic KX TGA420B - Manual (Page 64)

Error Messages
Display messages
If the station unit detects a problem, one of the following messages will be
displayed. Error beeps or a busy tone will sound.
Display message Cause & Remedy
No link to base.
Walk closer to
base & try again
The station unit has lost communication with
the base unit. Locate the unit near the base
unit, and try again.
Recharge The battery needs to be charged. Connect the
AC adaptor to recharge {p. 9).
Systein is busy.
Please try again
later.
If 4 other units are in use (for users registered
to KX-TG4000B), or if more than one unit is in
use (for users registered to KX'TG2000B):
- you may not be able to program certain
function items, such as “Set password” or
“Pager on/off,
- you may not be able to make an external or
internal call, or
- you may not be able to listen to messages in
your mailbox.
Try again later.
Busy • The paged party is engaged in a call.
• While another user is listening to messages in
the general delivery mailbox, you cannot
access that mailbox (p. 50).
• All lines are in use or a line of the button you
pressed is in use. You cannot make a call.
Try again later.
• A paged unit is too far from the base unit.
Invalid • A paged unit has not been registered to the
base unit.
•The unit you are canceling has not been
registered to the base unit (p. 39).
Memory is full
When trying to store an item in the directory,
the directory memory is full. Erase other items
and try again (p. 28).
Install battery
You have not installed the battery in the battery
compartment (p. 8). However the unit will work
with the AC power. If
“install battery”
displays with the battery installed properly, the
battery may be impaired. In that case replace
it with a new one (p. 59).
64