8 sat 10:oop12:oop 125, Recording is in progress), Recording is not in progress) – Panasonic OMNIVISION PV-8401 User Manual
Page 19: Cancel a timer recording, Replace program contents, Review or clear program contents, Timer recording using vcr buttons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STOP
Cancel a Timer Recording:
(Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Press PROG to display the “SET
PROGRAM” screen.
2 Press
AT
to select “TIMER
PROGRAM,” and then press ► to
display all currently set programs.
3 Press
AT
and ► to select and
set a program number.
(See page 18.)
4
Press AT and ◄ ► to select
and set replacement timer
information.
5 Press PROG twice to exit this mode.
--------- SET PROGRAM ................
VCR Phi*+ PROGRAM
P DT START STOP CH SPO
0
2
S 10:
3 10 &:
4 SU 9;
00P12:00P125
SP
OOP 9:OOP 10 SP
O0P10:00P L LP
SELECT 1-8:
a
t
KEY
EITTEfl :► KEY
END :PROG KEY
START STOP CH
8 SAT 10:OOP12:OOP 125
BQSDBHni™'
SELECT;A T KEY
SET :4 ► KEY
END :PHOQ KEY
Review or Clear Program Contents:
(Recording is not in progress) ___
1 Press PROG to display the “SET
PROGRAM” screen.
2 Press
AT
to select “TIMER
PROGRAM," and then press ► to
display all currently set programs.
3 Press
AT
to select a program
number.
4 Press ADD/DLT if you want
to clear the program.
5 Press PROG to exit this mode.
SET PROGRAM
VCR
PhR*
PROGRAM
! IMiiR OROGHAL'
P DT START
STOP CH $PD
8
10:00P12:00P125
SP
1 10 8;OOP 9:00P 10 SP
I SU 9:00P10;00P L LP
CANCEL:AOD/DLT KEY
SELECT 1-0:
a
t
KEY
ENTER :► KEY
END ;PR0G KEY
P DT START STOP CH
SPD
Q----------- :---------- __
2 8 10:OOP12:OOP125
SP
3 10 6:00P 9:00P 10
SP
4 SU 9;0OP1O;OOP L
LP
SELECT 1-8;
a
t
KEY
ENTER KEY
END :PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to nrrove the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction.
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and press REW, (release REW first, and
then release STOP/EJECT) to exit this mode,
6 Insert a cassette with record tab and press POWER off to set the timer.
19