Using the multi-brand control, Vcr mode, Tv mode – Panasonic OMNIVISION PV-8401 User Manual
Page 29: Dsstcablemode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Multi-Brand Control
Once the remote control has been properly set up, you can select VCR, TV, or DSS/CABLE mode
depending on which functions you wish to control.
Press
VCR
or
TV
or
DSS/CABLE on the remote control to select the desired mode.
{See below for the controllable functions of each mode.)
NOTE:
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing NUMBERED
keys for channel selection.
VCR Mode
In VCR mode, the following
buttons are available.
VCR
All function buttons.
TV
VOL UP/DOWN
TV Mode
In TV mode, the following buttons are
available.
IV
POWER. INPUT, NUMBERED
keys, ENTER, CH UP/DOWN,
VOL UP/DOWN
VCR
VCR/TV, PLAY. STOP. FF. REW,
PAUSE. SLOW, REC. SPEED,
COUNTER RESET, ZERO/1 MIN.
DSStCABLEMode
In DSS/CABLE mode, the following
buttons are available.
DSS/CABLE
POWER. NUMBERED keys,
ENTER, CH UP/DOWN
IV
VOL UP/DOWN
VCR
VCR/TV, PLAY, STOP, FF, REW,
PAUSE, SLOW. REC, SPEED,
COUNTER RESET, ZERO/1 MIN.
Some TV, Cable Box and DSS Box brands require you to turn on the power manually.
Not all functions listed may be controlled by this remote control.
29