Connection type a, Connection type b, Vcrplus+^set – Panasonic OMNIVISION PV-8401 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCRPlus+^Set^
Easy Taping.
VCR Plus+ programming allows you to set most items of a timer recording by simply entering
a special code (PlusCode) found in
TV GUIDE
magazine as well as the TV listings in
selected newspapers. In order for your VCR to do a VCR Plus+ recording, or a timer
recording of cable stations, some setup is required.
At first, choose your Connection Type.
(Then, follow the instructions under the diagram.)
Connection Type A
D C
Connection Type B
<CABLE BOX VCR TV>
Back of VCR
Cable/ M RF CoaxU Cable
Antenna
Or, <ANT/CABLE BOX DSS BOX VCR -» TV>
If your system connection looks like one of
the diagrams above, do the following.
1. Complete '*Cable Box Setup” at right.
2. Skip page 26 and go directly to page 27 for
VCR Plus-i- Programming.
<VCR TV>
Or, <VCR CABLE BOX TV>
If your system connection looks like one of
the diagrams above, do the following.
1. Skip “Cabie Box Setup” at right and turn
to page 26.
2. Complete “VCR Plus+ Channel Setup”
on page 26.
3. Turn to page 27 for VCR Plus+
Programming.
24