Panasonic OMNIVISION PV-8401 - Manual (Page 30)

|Г^^Д| SpecialVC^Featu^
Mmportant: If the remote control POWER,
not work when pressed, press
l^c
Check list before you begin.
n All connections are made. (See pages 6-9.)
n VCR is plugged in.
Q TV is turned on and set to the VCR channel (CH 3 or 4).
ACTION, PROG. CHA/T, INDEX, or ADD/DLT button does
the VCR button on the remote and try the button again.
Blue Back ON/OFF Feature
■ You may choose whether or not you want the VCR to display a
solid blue back screen when the broadcast signal is very weak.
1
Press ACTION* to display
the menu.
REC/TIME
2
3
b
c
VCR Lock Feature
When activated, this feature prohibits all operations except
for timer recording and tape eject. This feature may be
used to keep young children from operating the VCR.
VCH LOCK ACTIVATED
VCR LOCK OFF
Hold down REC/TIME
on the VCR without a
cassette inserted for 7
seconds while in Stop
mode.
To Cancel the VCR
Lock feature,
with or without a cassette
inserted, hold down
REC/TIME on the VCR
for 7 seconds again while
in Stop mode.
VCR Lock mode is cancelled automatically after 24
hours as long as the clock is set.
30
Press AW to select “SET
UP VCR," and then
press ► to display the
“SET UP VCR” screen.
Press AW to select
“NOISY CH BLUE BACK,”
and then press ^ to
select “ON" or “OFF.”
MENU
SET CLOCK
SET UP CHANNEL
ID ЮМА/ LANGUE: ENGLI SH
SELECT
SET
END A V KEY
► KEY
ACTION KEY
......... - SET UP VCR............. -
REPEAT PLAY
BEEPER
:JOISY CH BLUE BACK
: ON
: ON
: ON
SELECT
SET
END A ▼ KEY
► KEY
ACTION KEY
When “ON" is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFF' is selected, the picture
is displayed regardless of the signal condition.
The picture can not always be seen cteariy when
“OFP is selected.
Press ACTION twice to exit.
NOTE
When the VCR is connected to a Combination
VCR which has a Blue Back feature, even If
the VCR Blue Back is set to “OFP on the VCR,
the screen will go to blue back.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound
each time an invalid entry or incomplete operation is made.
3 Press ACTION to
display the menu.
Press AW to select
“SET UP VCR," and then
press ► to display the
“SETUP VCR” screen.
Press AT to select
“BEEPER,” and then
press ^ to select
“ON” or “OFF.”
--------------- MENU ---------------
SET CLOCK
SET UP CHANNEL
ID1 ОМА/ LANGUE: ENGL I SH
SELECT:A w KEY
SET :► KEY
END :ACT I ON KEY
--------- SET UP VCR-------------
REPEAT PLAY : ON
: ON
NOISY CH BLUE BACK: ON
SELECT: a ▼ KEY
SET :► KEY
END :ACTION KEY
Press ACTION twice to
exit this screen.