Basic connection, Vcr) – Panasonic OMNIVISION PV-8401 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Basic Connection
or
V
1
Disconnect the antenna or
cable from your TV and connect
it to the VCR (IN FROM ANT.)
( VCR)
3
Set the Output Chennel of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Locai TV broadcast).
Cable TV
or
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
2
Connect the VCR to your TV with
the RF Coaxial Cable (OUT TO TV).
r WARNING----------------------------------------------------------------------------------------------------------------------------
When using “Nut type" RF coaxial cables, tighten with lingers only. Overtightening may damage terminals.
Advertising