Vcr and cassette information, Erase protection (record ta, D.s.t. (daylight saving time) – Panasonic OMNIVISION PV-8401 User Manual

Page 5: Spring (first sunday in april), Autumn (last sunday in october), Specifications, Video heads sensor system, Auto daylight saving time, Specifications head cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

,

. - i

' V - ,

t

VCR and Cassette Information

[ Erase Protection (Record Ta^

Cassettes have a record tab to ensure that
recordings are not accidentally erased.

To prevent accidentat erasure,

break off the tab with a screwdriver

«à

iver. (“¿rr-

To record again, cover the

hole with cellophane tape.

Reset all VCR Memory Functions

Use when moving the VCR to a new location, or if a
mistake was made in the One Time VCR Setup section.

• Make sure a tape is not inserted in the VCR.

1) Turn VCR Power on.

2) Press and hold both PLAY and CHANNEL

A

on the

VCR for more than 5 seconds.

• The power will shut off.

3) Perform the One Time VCR Setup section on page 12.

D.S.T. (Daylight Saving Time)

Maximum Record/Playback Time

Only use tapes with the

IVtiSI mark

in this unit.

Tape Speed

Setting

Type of Video Cassette

T60

T120

T160

SP

(Standard Play)

1 Hour

2 Hours

2 Hours

40 Minutes

LP

(Long Play)

2 Hours

4 Hours

5 Hours

20 Minutes

SLP

(Super Lortg Play)

3 Hours

6 Hours

8 Hours

Your VCR can be set to automatically adjust the clock for

Daylight Saving Time. (Page 13.)

Spring (First Sunday in April)

When set to DST:ON, the VCR will automatically set the
clock ahead one hour.

Autumn (Last Sunday in October)

When set to DST:ON, the VCR will automatically set the
clock back one hour.

• If your area does not observe Daylight Saving Time,

select DST:OFF.

• Keep these time changes in mind when programming

the VCR for timer recordings.

Specifications

Head Cleaning

Your VCR will not normally require head cleaning,
however the heads may become clogged when playing
an old or darnaged tape.

Video Heads Sensor System

If head cleaning becomes

necessary, the VCR will display
the screen at right while playing
back a recorded signal.

To exit this screen, push PLAY

on the remote control or VCR.

VIDEO HEADS MAY

NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL

END:PLAY KEY

• Uso “dry" type head

cleaning cassette* only.

• Be sure to follow the cleaning tape instructions carefully.

Excessive use of a cleaning cassette can shorten head life.

• If using a head cleaning cassette does not solve the problem,

contact your nearest Factory Service Center or authorized

Service Center, {See page 32.)

• Cleaning cassette part No. NV-TCL30PT Is recommended.

Power Source:
Power Consumption:

Video Signal;
Video Recording System:

Audio Track:
Tuner:

Broadcast Channels:

CABLE Channels:

Operating Temperature:
Operating

Humidity:

Weight:

Dimensions:

120V AC, 60 Hz

Approx. 18 watts (Power on)
Approx. 4.1 watts (Power off)

EIA Standard NTSC color

4 rotary heads helical
scanning system

1 track (Normal)

VHF2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)

Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)

Special CABLE channel 5A (01)

Ultraband 65-94, 100-125

4rF-104°F(5“CU0“C)

10%-75%

7.5 lbs. (3.4 kg)

14-15/16” (W)x 3-2/3" (H)x
12-3/16" (D)

380 (W)

X

93 (H)

X

310 (D) mm

Note: Designs and specifications are subject to change

without notice.

Advertising