Recording a marker message, Speak immediately after the last 2 beeps, Turning on the speakerphone (answer back) – Panasonic KX-F220 User Manual
Page 100: If you want to talk to the other party in the room, How to operate from a remote phone, 2 beeps
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO OPERATE FROM A REMOTE PHONE
(CONT.)
Recording a Marker Message
After retrieving all of your messages from a remote phone, you can leave a message to anyone who knows your ATAS
ID without redialing.
1
^ 3-beeps ^ 2-beeps ^
u Last message
Marker message (date, time, etc.)
_____________
10-sec. pause
"
J
3 beeps will be heard after the last message, followed
by a 10-second pause, and then 2 beeps will be heard.
2 BEEPS
Speak immediately after the last 2 beeps.
When recording is finished, hang up.
•The marker message will be recorded after the last
message on the tape.
Turning On the Speakerphone (Answer Back)
You may monitor sounds in the room where the unit is installed by turning on the speakerphone remotely. You can
also speak with anyone in the room, even if they cannot reach the unit.
Press “6”.
•The speakerphone of your unit wilt be turned on and you
can monitor the room sound for 30 seconds.
•To monitor further, press “6" again within 10 seconds of
hearing one beep.
If you want to talk to the other party in the room
Ask the other party to press the SP-PHONE button,
and then start the conversation.
•If no one answers, the line will terminate after
30 seconds.
•To use this function, position the SPEAKER VOLUME
control for normal use, otherwise it may be difficult for
anyone to hear you from the speaker.
2-13