Recording an outgoing message (ogm), Preparing the answering machine, Samples of ogm – Panasonic KX-F220 User Manual

Page 88: Ogm backup

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PREPARING THE ANSWERING MACHINE

In this section, we are going to describe the preparation of the answering machine.

■ Recording an Outgoing Message (OGM)

■ Setting Up for Receiving Voice-Messages and a Document

(Using as an Answering Machine and a Facsimile)

■ Programming an ATAS ID Number for Remote Operation

■ Programming a Callers’ Recording Time

Recording an Outgoing Message (OGM)

To use the unit as both an answering machine and a facsimile, you should first record your Outgoing

Message.

1

OGMÌRECl

%

Press

OGM REC

until a long beep is

heard, then release it.

•The IN USE indicator will light.

THU JUN29

3:00PM 00

OGM REC

»»»»

OGMfMcl

During ICM playback;

•For Back Space, press D
•For Skip Forward, pressB.
•For ICM Tape Reset, pressQ.

•To save the ICM, hang up after

playback.

•To record a marker message, speak

after hearing 2 beeps.

►When you press a button, press firmly.

After the beep, speak immediately,

clearly and loudly into the microphone,

approximately 8 inches away.

•Recording time is 16 seconds.

•For optimum performance, record the

OGM within 12 seconds.

•Do not pause for over 2 seconds while

recording.

When recording is finished, press

OGM

REC

again.

•The unit will play back the OGM to confirm

your message. Adjust the VOLUME
control to an audible level.

•Verifying your OGM, press OGM PLAY.

The OGM will be played from the

microchip.

THU JUN29

3:00PM 00

OGM REC

■ ■■

»»>

THU JUN29

3:00PM 00

OGM PLAY

»»»»

THU JUN29 3:00PM 00

TAPE BACK UP

Samples of OGM

“This is Panasonic Company. To send a FAX, press the asterisk (*) button. To
leave a message, speak after the long beep,".

“This is Panasonic Company. To send a FAX, press the asterisk (*) button. To

leave a message, speak

up to 1 minute

after the long beep."

OGM Backup

After recording your OGM on the microchip, it will be recorded onto the

tape from the microchip as a backup.

If a power failure takes place or the POWER switch is set to OFF, the OGM

recorded on the microchip will be erased. 7 seconds after the power is restored,

the unit will automatically re-record the OGM onto the microchip using the OGM

recorded on the tape.

2-1

Advertising