The tone detect setting, Changing parameter, Tone detect – Panasonic KX-F220 User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TONE DETECT
The TONE DETECT setting;
This unit is automatically disconnected when detecting a busy tone after dialing in SP-PHONE mode.
OFF: The unit does not detect a busy tone (Default).
ON: The unit detects a busy tone.
Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press then press “15”.
15.TONE DETECT=OFF
[l.OFF 2.ON]
Example:
Changing to “ON ’.
Press
“2”,
then press
SET.
□
SET
15.TONE DETECT=ON
[l.OFF 2.ON]
PROGRAM[l.DATA 2.TEL
3.SYSTEM 4.REPORT]
MENU
Press
MENU
to end the operation.
THU JUN29 3;00PM 00
4-12
Advertising