Set default, The set default setting, Note – Panasonic KX-F220 User Manual
Page 126: Changing parameter, Test [print or motor, The test switch, Test[print or motor, System programming functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM PROGRAMMING FUNCTIONS
(CONT.)
SET DEFAULT
The SET DEFAULT setting;
All parameters return to initial setting (default) excluding LOGO (#01) and YOUR LOGO (#02).
NO: Parameters do not return to initial setting (Default).
YES: Parameters returns to initial setting.
NOTE:
Once you set to "YES”, the parameters you have programmed are erased.
Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press then press “26”.
26.SET DEFAULT=NO
[1.NO 2.YES]
dJ
SET
Press
“2”,
then press
SET.
Press
“2”,
then press
SET.
26.SET DEFAULT=YES
[l.NO 2.YES]
PARAMETER RESET OK?
=YES [l.NO 2.YES]
MENU
Press
MENU
to end the operation.
THU JUN29 3:00PM 00
TEST [PRINT OR MOTOR]
The TEST switch;
This function is useful for PRINTER testing and MOTOR testing switches.
OFF: Does not function. (Default)
PRINT: Prints the test pattern. (Refer to "MOTOR AND PRINTER TESTING" on page 29 in INSTALLATION
MANUAL.)
MOTOR: Rotates the document feeder and printer motors. (Refer to “MOTOR AND PRINTER TESTING” and
"MAINTENANCE” in INSTALLATION MANUAL.
4-17