C; programming poll (multi polling), Programming poll (multi polling), Using the priority buttons – Panasonic KX-F220 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING THE PRIORITY BUTTONS
(CONT.)
C;
Programming POLL (Multi Polling)
Before programming multi polling, the desired phone numbers must be stored into ONE-TOUCH stations and/or
SPEED DIALING stations.
Enter phone numbers using one of the following ways.
■ One-Touch dialing:
----------------------------
Press a
ONE-TOUCH
station.
ENTER PHONE NUMBER
1 oik
(e.g. If the station number is 7.)
=<S07> [01]
Speed dialing:
station No.
Press
AUTO
and
station number
(2 digits).
(e.g. If the station number is 00.)
Press
SET.
Repeat steps (4C) and (5C) for storing
phone numbers (up to 40 stations).
ENTER PHONE NUMBER
=<A00>
[
01
]
ENTER PHONE NUMBER
[
0 2
]
After storing all the numbers, press
SET
again.
DELAYED POLL=OFF
[1. OFF 2. ON]
1-45