Panasonic SC-CH7 - Manual (Page 25)

Program play
This function allows you to program up to 20 tracks on the disc in
any order you choose.
1 Press the function selector button marked
“CD 10 KEY”.
2 Press the program button.
Program indicator
n n
me LJ
u
TfMCS
1 2 S 4 s e 7 a ft 10 11 12 12 14 IB IS
3 Press the numeric buttons in the desired
track sequence.
To program more than one track from the disc such as 3, 5
and 7 in that order:
Press t h e Q . Q , and
q buttons.
Program sequence
Program track number ! Playing time
Programmed track numbers
To select a specific track
Tracks 1-9: Press the appropriate numeric button
1-9
directly.
Tracks 10 and up (For example, to select the track number
such as 25):^ First press A , then to select the “tens"
digit, and ^ to select №e “units" digit.
•If the total playing time exceeds 99 minutes or the track number
21 (or higher) has been specified, the display reads “ — : — B u t
the program play can be performed.
•When the 21st program has been performed, “-F" (full) appears
on die display, indicating that no more tracks can be added to the
programmed sequence.
4 Press the play button.
The programmed sequence is played beginning from the first
track you entered.
BTo cancel program play
I PROGRAM I
Press the program button while a disc is being played, and normal
play will resume.
M To enter additional program
h-o.>iol
Press the numeric button corresponding to the track to be added.
■ To cancel an entire program
Press the stop button when a disc is r>ot being played (or twice
when a disc is being played). The entire program will be canceled.
■ To cancel the selected tracks one by one
[CANCEL
I
0 Preu the cancel button.
The cancel indicator will illuminate.
(g) Presa the numeric button of the track to be cancelled.
(D Press the cancel button.
The cancel indicator will go out.
- 25 -