Panasonic SC-CH7 - Manual (Page 40)

Recording
(Tape deck 2 only)
You can make a record mth your desired tone
quality and ambience enhancement effect.
Though you can record a CD by the following procedure, it is
recommended that you use the handy CD edit-recording procedure
to record a CD. (See F»ages 42-45.)
When recording from tape to tape, follow the procedure for tape to
tape recording (on page 46).
Carry out die step 1 of "Standard Operation” on page 20.
1 Press the eject button, and then insert the
cassette to be used for recording into tape
deck 2.
(The part of Uie cassette where the tape
is exposed should face downward) rioa^i
2 When making a Dolby NR recording, press
the Dolby noise reduction button to select
“B” or “C”.
3 Select the reverse mode.
One side will be recorded, then the tape will
'automatically stop.
sides will be recorded (forward side reverse
side), then the tape will automatically stop.
4 Press the Input selector corresponding to the
sound source (compact-disc player, phono
disc, etc.) from which you want to make the
recording.
5 Press the record/record standby button.
Recording indicator will illuminate
ipj iSi
6 Press the playback button (The recording will
begin.), then begin the sound source to be
recorded.
When recording on either the forward side or
both sides.
When recording only on the reverse side.
Synchro Start function
When you make a recording from a CD, №e recording wi
automatically take place if you press the play button on the CD
player. After recording has b^ done, the cassette deck will create
a non-recorded passage of about four seconds, then go into the
recording standby state.
M To briefly Interrupt recording
I recpause I
Press the record/record standby button.
To resume recording, press the play button corresponding to the
direction in which recording is taking place.
■ To stoD recordino
r~5~1
Press the stop button.
Notes:
•Only tape deck 2 can used for recording. Tape ded( 1 has no
recording capability.
•You cannot record on the leader tape, so take up the leader tape
in advance.
•The optimum recording level wilt be set automatically.
•Types of tapes that can be played: nornial, chrome, metal.
Deck 2 operating indicator will flash.
-40-