Panasonic SC-CH7 - Manual (Page 36)

Changing the Tone Quality
(continued)
To store a desired equalization curves
You can easily create the desired tone quality by using №e sound
effect level control. The tone qualities you created are automaticai-
iy stored (up to 6 ) in the unit's memory.
1 Press the equalization function button to ON.
2 Press the equalization mode-select/recall but­
ton momentarily to select the desired tone
quality.
Each time you press this button, the equaiization curve wili
change as follows.
HEAVY-.-CLEAR-»SOFT-» VOCAL^H.P.ST-^CAR ST
t____________________________________ I
3 Adjust the equalization effect to create the
desired tone quality with the sound effect
level control.
TSOUNDJOQ
"USER" indicator
wiil illuminate.
ИСМП. OEM
•on »WCM.
KP KT CM «T
To gain this effect, turn clodcwise.
Onoe adjustment has been done, the equaiization curves wilt
be automatically stored as the "USER" curve in the unit's
memory.
To retrieve equalization curves from
the memory ___________
H Press the equalizer mode seiect/recall button
momentarily to select the mode in which you
have programmed previously.
^ Press and hold the equalizer mode select/
recall button to Illuminate the user Indicator
and to change to your desired tone.
Note:
•To confirm the equalization curve, press the equalization
function button twice.
-36-