ALFA NETWORK AWAP411 - Manual (Page 10)

AWAP411 150M Wireless 11N Access Point
1.3 Appearance
1.3.1 The Front Panel
Figure 1-1
The front panel of the consists of several LED indicators, which is designed to indicate
connections. View from left to right, Table 1-1 describes the LEDs on the front panel of the device.
LED Explanation
Name Status Indication
Off No Power
Power
On Power on
Off The device has a system error
On
The device is initialising
System
Flashing
The device is working properly
Off
There is no device linked to the corresponding port
On
There is a device linked to the corresponding port but no activity
LAN
Flashing
There is an active device linked to the corresponding port
Off
The Wireless function is disabled
WLAN
Flashing
The Wireless function is enabled
Slow Flash A wireless device is connecting to the network by WPS function.
This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the network by
WPS function.
WPS
Quick Flash A wireless device failed to be added to the network by WPS
function.
Table 1-1
4