ALFA NETWORK AWAP411 - Manual (Page 21)

AWAP411 150M Wireless 11N Access Point
Finally, after the PIN code is synchronized the SSID will be displayed in a scramble text
format.
4.4 Network
The Network option allows you to customize your local network manually by changing the default
settings of the AP.
Selecting Network will enable you to configure the IP parameters of Network on this page.
Figure 4-5 Network
¾
Type - Select Dynamic IP to get IP address from DHCP server or select Static IP to
configure IP address manually from the drop-down list.
¾
IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default
setting is 192.168.1.254).
¾
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
¾
Gateway - The gateway should be in the same subnet as your IP address.
¾
MAC Address - The physical address of the AP. The value can't be changed.
)
Note:
1 If you change the IP Address, you must use the new IP Address to log in the AP.
15