ALFA NETWORK AWAP411 User Manual
Page 15
AWAP411 150M Wireless 11N Access Point
4. Configure the IP address manually.
1) Select
Use the following IP address.
2) Enter 192.168.1.* (* is any integer between 1 to 253) into the IP address filed,
255.255.255.0 into the Subnet mask filed and 192.168.1.254 into the Default gateway
filed.
3) Click
Ok to keep your settings.
Figure 3-4
5. Verify the network connection between your PC and the AP via the Ping command. The
following example is in Windows XP Operating System.
1) Click
Start > Run tab. Enter cmd in the filed and click OK.
2) Type
ping
192.168.1.254 on the screen that displays and then press Enter.
If the result displayed is similar to that shown as Figure 3-5 below, the connection
between your PC and the AP has been successfully established.
Figure 3-5
9