ALFA NETWORK AWAP411 - Manual (Page 20)

AWAP411 150M Wireless 11N Access Point
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here takes AWUS036NH for example.
Step 1: Enter the PIN code of wireless adapter into the router.
In this example the wireless adapter, AWUS036NH, please copy the PIN Code from the
WPS tag as shown below.
Step 2: For the router, click the Add device button on the WPS screen
Then select Enter the new device’s PIN and enter the PIN code of the adapter on the
screen displayed below. Then click Connect.
) Tip,
Press the PIN button to speed up the synchronization.
14