ALFA NETWORK AWAP411 - Manual (Page 19)

AWAP411 150M Wireless 11N Access Point
4.3 WPS
WPS can help you to quickly and securely connect to a network. This section will guide you to add
a new wireless device to an existing network quickly by function. The WPS function is only
available when the Operation Mode is set to Access Point and Multi-SSID. Here we take the
Access Point mode for example. Select menu “WPS”, you will see the next screen shown in Figure
4-4.
Figure 4-4 WPS
¾ Operation Mode - Displays the current operation mode of the device.
¾
WPS Status - To enable or disable the WPS function here.
¾
Current PIN - The current value of the device's PIN is displayed here. The default PIN of the
device can be found in the label or User Guide.
¾
Restore PIN - Restore the PIN of the device to its default.
¾
Gen New PIN - Click this button, and then you can get a new random value for the device's
PIN. You can ensure the network security by generating a new PIN.
¾ Add device - You can add a new device to the existing network manually by clicking this
button.
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.
13