Operator’s manual – ANKOM XT15 Series User Manual
Page 17
Operator’s Manual
Rev F 12/08/14
pg. 17
3. Insert Filter Bags into the instrument.
3.1 Press down the Safety Valve Handle to release the Safety Valve
Pin and rotate the Main Handle upward until it stops.
3.2 Use the Extraction Vessel Handle to pull the Extraction Vessel
out.
3.3 Slide the Extraction Vessel toward you far enough to remove the
white Teflon Insert or to put the Bag Holder directly into the
Teflon Insert while it remains in the Extraction Vessel.
It is not necessary to remove the white Teflon Insert from the Extraction Vessel
in order to put the Bag Holder in place.
3.4 Put the Bag Holder (with up to 15 bags) into the Teflon Insert.
3.5 If you removed the Teflon Insert, put it back
into the Extraction Vessel, aligning the Teflon
Insert slot with the Extraction Vessel pin.
The Teflon Insert O-ring and the Extraction Vessel O-ring must be in
place before running the instrument.
The Teflon Insert slot must be aligned with the Extraction Vessel pin
before running the instrument.
Teflon Insert O-ring
Extraction Vessel O-ring
Teflon Insert
slot and
Extraction
Vessel pin
Teflon Insert
Bag Holder