Checking the battery level – Canon EOS ELAN7NE-33V User Manual

Page 19

Advertising
background image

19

Checking the Battery Level

Check the battery level after replacing the batteries and before using the
camera.

• The battery life shown above is based on Canon’s testing conditions

with new batteries.

• Figures in parentheses apply when the Eye Control switch is <

1

>.

Battery Life

(With 24-ex. rolls)

Turn the Mode Dial to a shooting
mode.

Hold down the dial’s lock release
button while turning the dial.

s

The camera will then turn on and the
LCD panel will display one of the
following battery level mark:

: Battery level OK.

: The battery level is low. Keep

spare batteries handy.

: The batteries will soon be

completely exhausted.

: Replace the batteries.

Temperature

0% Flash Use

50% Flash Use 100% Flash Use

At 20˚C

125 (115) rolls

38 (33) rolls

19 (17) rolls

At –20˚C

70 (65) rolls

20 (19) rolls

10 (9) rolls

• If nothing is displayed on the LCD panel, the batteries may have been

installed incorrectly. Take out the batteries and install correctly.

• If you often press the shutter button halfway for a prolonged period or just

autofocus without taking a picture, the battery life will be affected.

• When not using the camera, set the Mode Dial to <

2>.

Advertising