Canon EOS ELAN7NE-33V - Manual (Page 80)

80
Using the Built-in Flash
aFlash Exposure Compensation
★
Flash exposure compensation can be set in the same way as with
exposure compensation. It can be set up to +/–2 stops in 1/2-stop
increments.
1 Move the <7> arrow to the <a>
icon on the LCD panel.
• Press the < 0 > button to move
the arrow. (1)
2 Set the flash exposure
compensation amount.
• Turn the <i> switch to <1> and
turn the <u> dial.
• To cancel flash exposure
compensation, set the amount back
to <c>.
• Press the shutter button halfway to
return to normal camera operation.
Re flash exposure index
Flash exposure level mark
Increased flash exposure
Decreased flash exposure
Decreased flash
exposure Increased flash
exposure
3 Take the picture.
• The flash exposure compensation amount is retained even after the Mode
Dial is set to <2>.
• You can also set the compensation amount with the Main Dial.
• Even with an EOS-dedicated Speedlite attached, you can still set the flash
exposure compensation with the camera as explained above.