Canon EOS ELAN7NE-33V - Manual (Page 48)

48
gUsing Eye Control
(m Model only)
With Eye Control, you just look at the AF point where you want to focus.
• Eye Control can be used in all shooting modes except <Y> (Full
Auto).
• In the <Y> (Full Auto) mode, Eye Control information is also added to
the automatic AF point selection program for more precise automatic
AF point selection.
1 Set the Eye Control switch to
<e>.
2 Select the CAL No.
• Turn the <l> dial to select your
CAL No.
Non-blinking number:
Indicates registered calibration.
Blinking number:
Indicates unregistered calibration.
3 Set the Eye Control switch to
<g>.
4 Select a shooting mode.
• Turn the Mode Dial to select the
desired shooting mode.
5 Turn the AF mode dial to select
the AF mode.