Eeye control calibration, Eye control calibration and operation tips, Intelligent eye control – Canon EOS ELAN7NE-33V User Manual

Page 46

Advertising
background image

46

e

Eye Control Calibration

(m Model only)

Eye Control Calibration and Operation Tips

• Hold the camera as you always do while looking through the viewfinder.
• Look through the viewfinder so you can see all four corners of the

viewfinder.

• Avoid squinting or blinking your eye.
• When using Eye Control, look through the eyepiece in the same way

you did during the calibration.

• During the calibration procedure, keep looking (without moving your

eye) at the blinking AF point until it lights and the beeper sounds.

• Keep both eyes open while looking through the viewfinder.
• If you wear eyeglasses, wear them properly without having them slide

down your nose.

Eye Control calibration and operation might not be possible in the
following cases:
• When you wear bifocal eyeglasses or hard contact lenses.
• You wear mirror-type sunglasses or other specially-coated glasses.
• Your eye is too far away from the eyepiece due to eyeglasses, etc.
• Your eye is too close to the viewfinder.

Intelligent Eye Control

You can repeat the calibration procedure under different conditions such
as when you are outdoors, indoors, or at night. The camera can save
these additional calibration settings under the same CAL No. By
accumulating more calibration settings, the camera can provide more
precise Eye Control.

Two or more users must not share the same CAL No. Each user should have
his or her own CAL No. If necessary, delete the calibration settings saved
under another CAL No. to store another user’s calibration settings. (p.47)

Advertising