Canon EOS ELAN7NE-33V - Manual (Page 92)

Film Advance
Mode
One-Shot AF AI Servo AF
J
(Single frame)
H
(Continuous)
AI Focus AF
92
AE Lock Effects
AF Mode and Film Advance Mode Combination
∗ If you use Eye Control AF and press the <j> button before you press the
shutter button halfway, AE lock will be applied to the center AF point.
AF Point Selection
Method
Metering Mode
Manual AF Point
Selection / Eye Control
AE lock is set at the
selected AF point. AE lock is set at the AF point
which achieved focus.
AE lock is set at the
center AF point.
AE lock is set at the center
AF point. AE lock is set at the
selected AF point.
∗
AE lock is set at the
center AF point.
Automatic AF Point Selection
Z Evaluative
X Partial
C.Fn-08-0
C.Fn-08-1
C Center-weighted
averaging
The picture cannot be
taken until focus is
achieved. When focus
is achieved, it also
locks at the same
time. The evaluative
metering’s exposure
setting is also locked.
(The exposure setting
is retained until the
picture is taken.)
The same conditions
above apply during
continuous shooting.
(approx. 4 frames per
sec.)
The subject is focus-
tracked for continuous
autofocus. The
exposure is set when
the picture is taken.
The same conditions
above apply during
continuous shooting.
(approx. 3.5 frames
per sec.)
Automatically
switches between
One Shot AF and AI
Servo AF according
to the subject status.