Aviom 6416Y2 - Manual (Page 16)

i
NstalliNg the
6416Y2 c
ard
Before installing the 6416Y2 card in a compatible Yamaha digital device, be sure to read the DIP switch configuration
section of this User Guide (page 25).
The 6416Y2 card can be used in any MY (mini‑YGDAI) expansion slot in a Yamaha digital mixing console or
compatible digital product (see the list on page 3). The specific number of available MY expansion slots varies
with each model. Yamaha expansion slots are identified by number, starting with “Slot 1.” Within an MY expansion
slot, its audio resources are referred to as “channels,” numbered from 1 to 16 in the Yamaha interface.
P N
ote
The 6416Y2 card is electrostatic‑sensitive. Before handling the card, you should briefly touch the host
unit’s metal casing with your bare hand to drain off any static charge from your body.
The components of the card are indicated in the diagram below.
Multi-pin
backplane
connector
Thumb screws
Align sides of 6416Y2
card with the guides in
the MY expansion slot.
Front panel DIP switches,
connectors, and LEDs
P N
ote
: Some Pro64 network and audio routing settings cannot be changed once the card has been connected
to the Yamaha device since they are changed via DIP switches found on the circuit board of the card
itself.
6 I
nstallInG the
6416Y2 c
ard