Aviom 6416Y2 - Manual (Page 3)

READ THIS FIRST
Important Safety Instructions
Read these instructions. 1.
Keep these instructions 2.
Heed all warnings. 3.
Follow all instructions. 4.
Do not use this apparatus near water. 5.
Clean only with a dry cloth. 6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s 7.
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
8.
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding‑type plug. A polar‑
9.
ized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or third prong are provided
for your safety. If the provided plug does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs,
10.
convenience receptacles, and the point where they exit the apparatus.
Only use attachments/accessories specified by the manufacturer.
11.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, 12.
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip‑over.
Unplug this apparatus during lightning storms or when unused for long periods of
13.
time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus
14.
has been damaged in any way, such as when the power‑supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
No on/off power switches are included in the system. The external power supply
15.
should be used to control power to an Aviom device. This power supply should
remain readily operable.
The solid line over dashed line symbol (
16. ) indicates that the input voltage
must be a DC voltage.
The box within a box symbol (
17. ) indicates that the external power supply is double
insulated.
iii