Aviom 6416Y2 - Manual (Page 7)

Warning
Failure to observe the following warnings may lead to risk of serious injury from fire or electric
shock.
Before installing the 6416Y2 card, you must refer to the owner’s manual of the host device or to the
Yamaha website to verify that your host device supports this card, and to verify the number of cards that
can be installed in combination with other Yamaha or third‑party cards.
Do not attempt to disassemble or modify the card. Do not apply excessive force to board •
connectors or other board components. (Mishandling the board may lead to shock, fire
hazard, or equipment failure.)
You must turn off the power of your device before you begin installing the 6416Y2 card.
•
Be sure to disconnect the • power cable from the main unit before installing this card (to
eliminate shock hazard).
Caution
Failure to observe the following precautions may lead to personal injury, or may result in
damage to equipment or other property.
Do not touch the board’s metallic leads (pins) when handling the card. (Pins are sharp •
and may cause hand cuts.)
The card is
• electrostatic‑sensitive. Before handling the card, you should briefly touch the
main unit’s metal casing with your bare hand so as to drain off any static charge from
your body.
!
!
vii