Aviom 6416Y2 - Manual (Page 71)

61 m
-
control
Click on one of the Input Patch assignments to change its source. The diagram above shows console channel #1
getting its audio from the first channel of the first MY expansion slot. Repeat this procedure as needed for any
channels that need to be changed.
These Input Patch assignments will save and recall with the M7CL scene memories.
This close-up diagram of the External HA screen shows all editable parameters and routing info.
Console remote control messages sent from the PM5D can control the Pro64 mic preamp’s gain, +48V phantom
power, and high pass filter only via m‑control.
The PM5D’s HPF cutoff frequency and the remote preamp +48V Master on/off switch are not supported by the
Pro64 preamps.