Brookfield CT3 Texture Analyzer - Manual (Page 11)

Brookfield Engineering Labs., Inc. Page 11 Manual No. M08-372-C0113
to B Male. See Appendix D, (CT3 to Computer Command Set)
2) RS-232 Serial Port
Use with RS-232 Cable P/N DVP-80 to connect instrument to a computer.
See Appendix D, (CT3 to Computer Command Set)
3) Temperature Probe Plug - 4 pin plug. Use with Temperature Probe P/N DVP-94Y
4) Power Entry Module: ON/OFF switch-fused (see I.2 Utilities). Voltage: 90-265 VAC
I.8 Cleaning
Instrument and Keypad: Clean with a dry, nonabrasive cloth. Do not use solvents
or cleaners.
Probes and Fixtures: Probes and fixtures are made from a variety of materials
from metals (stainless steel, aluminum) to plastics (acrylic,
Black Delrin, Nylon). Clean with a nonabrasive cloth
using solvents that are appropriate for both the sample
material and the material of the probe and/or fixture.
Do not apply excessive upward, downward or sideways force to probe while fixed to
CT3. Damage may occur to the load cell.